Feb 14, 2024
Xabar QOLDIRISH
Precision casting processing is one of the methods of casting. Precision casting is a special casting method compared to the traditional casting process. It can obtain relatively accurate shapes and high casting accuracy. The more common practice is: firstly, according to the product requirements to design and manufacture (the margin can be very small or no margin) mold, with the casting method to cast wax, to obtain the original wax model; Repeat the coating and sanding process on the wax mold, harden the shell and dry; Then the internal wax mold is dissolved to remove the wax and obtain the cavity; Roasted shells for sufficient strength and breathability; Metal materials required for pouring; The sand is removed after hulling, so as to obtain a high-precision finished product. According to the needs of precision casting products, heat treatment and cold working are carried out.
1. What is precision casting of stainless steel
2. Precision casting process
1. Make molds according to different shapes of products. The mold is divided into upper and lower concave mold methods, which are completed through comprehensive processes such as turning, planing, milling, etching, and electric sparking. The shape and size of the pit are the same as half of the product. Because the wax die is mainly used for industrial wax pressing, the aluminum alloy material with low melting point, low hardness, low requirements, cheaper price and light weight is selected as the mold.
2. Use aluminum alloy molds to produce a large number of industrial wax solid core models. Under normal circumstances, an industrial wax solid core model can only correspond to one blank product.
3. The peripheral margin of the wax mold is refined, and a plurality of single wax patterns are glued to the pre-prepared die (also known as the group tree) after deburring, and this die is also an industrial wax solid core model produced by wax molds. (Looks like a tree)
4. A plurality of wax molds that have been fixed on the die are coated with industrial glue and evenly sprayed with a layer of fine sand (a kind of refractory sand, high temperature resistance, usually silica sand). The sand particles are small and fine, which ensures that the surface of the blank is as smooth as possible.
5. Let the wax mold sprayed with a layer of fine sand dry naturally at the set room temperature (or constant temperature), but it can not affect the change of the internal wax mold, and the natural air-drying time depends on the complexity of the product itself, and the general air-drying time of precision castings is about 5-8 hours. 10. Baking sand shell In order to make the sand shell of the waxed sand more solid and stable, before pouring stainless steel water, the sand shell should be baked, usually in a very high temperature (the temperature is about 1000 ゚) in the oven.
